Here are some process of installation cctv such as-
The closed circuit television camera is very much essential in the present time both in the office and home. Though this product is necessary to be set up it in the home and office because it not only protect your home and gives a security but also it captures some very much valuable video footage to be used in the future. So it is simple attempt to make the reader understand the installation process of a cctv came in your home or business.
1.Find the right location.
2.Find a pint of entrance from the outside of the home to the inside through which you can run the RG59 cable.
3.select a location for your DVR and Monitor to be place.
4.Bring the RG59 lines to that room from the attic. If you bought a bulk roll of cable without connections, you need to purchase the BNC connections and crimp each end on and then connect the DVR.
5.DC voltage is need for the power supply of cameras.
6.you must ensure that the correct DC voltage is used or the cameras may damage permanently.
7.you should connect DVR to your monitor before turning on power supply.
Just after finishing your installation your need to check everything whether it is ok or not and it also be a trial learning for you of using your system. Turn on and take a look at the video footage and make sure that you are able to monitor the area that you have involved in your plan. And it must give you better idea of using system and you knowledge must increase overtime. Keep going with it.